{
  "seedkeeper": {"title":"SeedKeeper · store and load","summary":"Use a contact card with SeedKeeper already installed. Host signing happens after the secret is loaded.","steps":["Enable smartcard support under Settings → Advanced and inspect Card Info in Tools → Smartcard Tools → SeedKeeper Functions → Card Settings.","Create/load a disposable seed. In Seed Options select Backup seed → To SeedKeeper; enter or set the card PIN and choose a label.","Wait for Secret Saved. Return to Seeds → Load a seed → From SeedKeeper and select that secret.","Compare the loaded fingerprint with the original. Keep an independent verified backup; a PIN cannot restore a lost card."],"source":"https://3rditeration.github.io/seedsigner/quickstarts/02-mnemonic-seedkeeper.html"},
  "satochip": {"title":"Satochip · initialize and export","summary":"Use an empty/test Satochip. Initialization imports a seed through the host; normal signing is performed on the card.","steps":["Enable both smartcard and Satochip support. Load a disposable test seed on the signer.","Open Tools → Smartcard Tools → Satochip Functions → Initialise with Seed. Set the new numeric PIN when prompted, choose the loaded seed and confirm import.","Compare View Master Fingerprint with the intended seed. Use Export Xpub, select the wallet/script type and coordinator, then scan the public QR into your watch-only wallet.","Use the Satochip signing option when reviewing a PSBT. An Already Seeded result is not a transport failure; do not factory-reset a card containing a wanted seed."],"source":"https://3rditeration.github.io/seedsigner/quickstarts/04-satochip-init-with-seed.html"},
  "diy": {"title":"DIY JavaCard · install an applet","summary":"A blank card is not yet a SeedKeeper or Satochip. Use a supported contact JavaCard with known management keys.","steps":["Verify reader transport with a known-good card first. Use a separate blank/test card for provisioning; the custom carrier has not passed bench tests yet.","Open Tools → Smartcard Tools → DIY Tools → Install Applet. For storage choose SeedKeeper-0.2-official.cap; the usual initial storage choice is 8 KB. For signing choose the pinned SatoChip-0.12-official.cap.","After installation inspect Card Info for the expected applet/protocol version. Set the applet PIN when its first operation prompts you.","Continue with the SeedKeeper or Satochip workflow. GlobalPlatform management keys, applet PIN and wallet keys are different credentials."],"source":"https://3rditeration.github.io/seedsigner/quickstarts/01-install-applets-diy-javacard.html"}
}